Ayers Basement Systems Before & After Photos

A customer in East Lansing had to ride over a bug bump in order to get into his garage every day. He knew we had the expertise to help so he gave us a a call. We drove to his property and decided to install our PolyLevel which is an advanced polymer based injection foam that we blast into the concrete to level it out and make it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

We received a call from a homeowner in East Lansing referring to there walkway being a trip hazard. They wanted our help to level it all out, so we drove out to his property to install our advanced polymer based injection foam called PolyLevel. PolyLevel is blasted into the concrete through very small holes which raise the concrete to be level and stronger than ever. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

This home had some water issues in the basement. We installed the WaterGuard to keep the area water free. The WaterGuard is a drain system that is under the floor but above the foundation to keep it out of the area where the drain could clog. The system collects water that gets into the basement and sends it to the sump pump where it is discharged outside of the home.

Everyone loves a good pool day. However when it’s the middle of winter in Michigan and the pool is stationed in your driveway, things aren’t looking too great on your end. Clay contacted us after noticing his sunken driveway was becoming a big problem. The ground underneath his old concrete driveway had begun to collapse and erode causing the driveway to curve in and store water.

How can this issue be fixed? Consider PolyLevel Injection Foam. The polymer consists of two liquids that when blended together, create a foam that expands to effectively lift settled concrete. Our PolyLevel Injection foam is quick-curing and non-invasive, meaning the soil surrounding the area will be less likely to experience any further damage.

Liam just moved into his home when he notcied that during heavy rain, a steady stream of water was coming through some cracks in the basement. There was no standing water, it had drained but he didn't want water coming in at all so he called us. We installed CarbonArmor to stabilize the wall. The CarbonArmor System is made up of flexible carbon fiber fabric straps that are up to 10 times stronger in tension than steel. These straps are bonded to the wall using high strength epoxy resin. This system requires no exterior excavation, installs quickly, and won't impact future basement finishing.