Concrete Leveling Before & After Photos

Jim and his wife have a concrete slab on their porch that is settling. One corner is sinking more than the rest which is causing cracks. We used PolyLevel to lift the concrete back up to the original level and make sure it is even with the rest of the porch. We also used NexusPro to seal the cracks and make sure the concrete is not degraded from below.

A couple from Holton Michigan was seeking a solution to their unleveled sidewalk. Over the years, the sidewalk had become unlevel and a tripping hazard. The couple contacted Ayers and set up an inspection. The team at Ayers concluded that PolyLevel would be an excellent solution for the couple's sidewalk. PolyLevel utilizes a rigid foam injected below the cement, allowing the cement to be raised and leveled. After working with Ayers, the couple's sidewalk looked night and day different and was no longer a tripping hazard!

We used our PolyLevel solution on an old barn with a sinking floor in Turner, Michigan. Our crew at Ayers first makes little holes in the concrete and uses them to inject structural-grade polymer that will lift and level the slab. The holes are sealed and patched with concrete. His barn floor will now be even, eradicating this customer's safety concerns. This solution is cheaper and faster than remodeling the entire floor!

This slab in Whitehall, MI was in desperate need of repair -- that's when we received a call. We used our patented PolyLevel to lift the slab quickly and without much intrusion. The PolyLevel injection nozzle is less than the size of a penny, meaning your concrete slab will not be left with massive filler holes. 

A customer from Whitehall had a business on the lake, and his business had these concrete slabs that were sinking, which was unsafe and looked terrible for his business. He gave us a call and we decided to install our advanced PolyLevel technology.

PolyLevel is a polymer injection foam, that is implanted into the concrete to level it out and make it stronger than ever. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this business owner will not have to worry about this ever again.