Ayers Basement Systems Before & After Photos

Ed had some water issues in his basement and wanted the water cleaned up so his basement could be dry. We installed the WaterGuard which is a French drain system that collects the water that seeps into the home and sends it to the sump pump. We also installed the SuperSump Premier Pump System. This system provides total protection and works perfectly with our drain systems.

One of our awesome customers from East Lansing gave us a call about the concrete at the front of their house. So we drove out there and noticed that there was some cracking and sagging happening, so we installed our PolyLevel technology which is an advanced polymer injection foam that we blast into the concrete to re-level it and make it stronger than ever.  PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Carol has water coming into her basment from the windows and the floor. There is standing water now and the sump pump is on the other side of the basement from where the water is coming in. We installed the SuperSump Pump System to keep the water out of the basement. We paired it with the WaterGuard system which is a drain installed under the floor to collect water that seeps in. The water that is collected is drained to the sump pump to be discharged outside of the home.

A customer in East Lansing had to ride over a bug bump in order to get into his garage every day. He knew we had the expertise to help so he gave us a a call. We drove to his property and decided to install our PolyLevel which is an advanced polymer based injection foam that we blast into the concrete to level it out and make it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

We received a call from a homeowner in East Lansing referring to there walkway being a trip hazard. They wanted our help to level it all out, so we drove out to his property to install our advanced polymer based injection foam called PolyLevel. PolyLevel is blasted into the concrete through very small holes which raise the concrete to be level and stronger than ever. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.