Concrete Leveling Before & After Photos

Frank needed his front patio leveled because it was cracking and sinking. So he called our team and we installed PolyLevel. PolyLevel is a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

Jeff noticed the beginning stages of his back patio starting to become uneven as the soil beneath it was causing it to separate. He made the right call by choosing Ayers to come fix it. We decided on installing PolyLevel and NexusPro Joint Sealant after an inspection was made. The PolyLevel solution will raise and level the concrete with the small, lightweight, foam injections we make in the slab. Then we use NexusPro Joint Sealant to actually fill and seal the cracks so that water or debris won't degrade the slabs from below. These are permanent, waterproof solutions and will get the job done much faster. Jeff was happy to get this problem area smoothed out to avoid this tripping hazard!

A homeowner from Caledonia called us about his unlevel concrete walkway and steps to his front door. He wanted our professional help so we drove to his property and installed our advanced PolyLevel technology. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again thanks to Ayers.

The Caledonia homeowner called us to find a solution to his sunken driveway that was causing issues with a handicap ramp they had. The slab had dropped about an inch on one end which caused a lip so they were having troble with the wheelchair. We installed PolyLevel which is designed to repair sunken driveways, uneven walkways and sidewalks, and steps that may cause tripping hazards. PolyLevel is a foam injection that is light weight but strong enough to hold up the load of cars. PolyLevel is also waterproof so that it won't wash away and it won't react with soils or moisture. The best part is how quick the curing time is so that you can park and walk on it within 15 minutes of being installed.

When we got a call from Randy in South Haven, MI that the concrete around his swimming pool is starting to become unlevel, we knew exactly what we had to do: PolyLevel Injections. The "Before" photo that you see on the left shows a zoomed in photo of one slab of concrete, however there were multiple slabs that were in need of PolyLevel injections. One of the many advantages of our PolyLevel injections is that it is waterproof. Once cured, PolyLevel will not wash away. This is especially important being right beside a pool. Another advantage of our PolyLevel is that it cures extremely fast. Within 15-30 minutes after being raised, it will have already reached at least 90% of its strength, therefore it can be used as it normally would very shortly after the job has been completed.