Ayers Basement Systems Before & After Photos

When the concrete slab off of their deck started to sink, these Potterville, MI residents gave us a call. We sent our crew out to the home to help this slab with PolyLevel. PolyLevel involves injecting the slab with high-density to help raise the slabs back to their original. These polymers are incredibly strong, yet lightweight. The injection sites ares small, and the cure time is quick, so the slab is raised back to normal the same day, and can be walked on only 15 minutes after installation.

A customer in Potterville was concerned by some unlevel slabs on the walkway of her backyard. So we came take a look at it, and decided to install PolyLevel which is a polymer injection foam that levels and strengthens the concrete. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

This homeowner has a crawl space under the addition but when it rains a lot, water seeps in. During the summer, the heat keeps the area fairly dry but it still has moisture in it. We were called because she wanted it to be sealed off to keep it dry. First, we put down drainage matting so that water in the crawl space could move and be directed to the sump pump. Second we installed the CleanSpace liner which is a thick durable liner similar to a pool liner. It prevents water vapor and humidity from passing through. By keeping your crawl space dry, your structure and insulation is protected from mold and rot. 

Many homeowners are not satisfied with their crawl space area. Typically they’re damp, musty, filled with miscellaneous debris and lack proper ventilation ー all ingredients fueling a recipe for disaster. 

However, at Ayers Basement Systems we take pride in mastering the art of crawl space encapsulation and waterproofing. In the case of Jennifer M.’s damp Potterville crawl space, the solution was simple: Clean Space Vapor Barrier System. 

First, we sealed all of the doors and vents so that outside air and humidity was no longer able to sneak in. Next we installed a crawl space drain and sump pump system. When combined, the drain and sump pump eliminates and removes any flooding water. Lastly, the area is encapsulated with our Vapor Barrier liner, a thick, durable liner that traps all other moisture in the air and ground. Without moisture, your crawl space will become smell-free and fungi-free.

After following all of the steps above we were able to completely transform Jennifer’s debris-filled, moist crawl space into a dry, ideal one. 

A low point where the sun porch met the foundation of this home was causing water to pool and leak into the crawl space. Leaks can cause problems ranging from mold to an unstable foundation, so it was important to reroute the water and waterproof the crawl space. 

40 feet of drain tile and a new chimney drain took care of the existing leak. Then we installed the CleanSpace crawl space encapsulation system with drainage matting and SilverGlo insulation to keep the crawl space dry and even create some usable storage space.