Ayers Basement Systems Before & After Photos

Our system design specialist came up with a unique use of one of our products to help out this Grand Rapids, MI customer. The home had a long driveway that was mostly asphalt but turned to concrete just in front of the garage. A slope in the ground where the concrete and asphalt connected would regularly fill with rain after storms and the resulting standing water was starting to erode both pavements. Our TrenchDrain grated pipe system is usually used outside of doorways and entrances to catch water before it flows into the home, but to keep this driveway serviceable, our system design specialist drew up a plan for a TrenchDrain to be placed in the dip of the asphalt. As you can see in the after photo, the drain spans the length of the driveway and will capture water any water that builds up in the trench. Not pictured is the discharge line that was also installed and will lead the rain water to a distantly placed lawn outlet. Water build up won’t be a problem for this driveway again. 

A homeowner called in with a few issues going on in his basement. He had cracks on the wall and on the floor, that was allowing water to flow in. After calling other company to remove the water in his basement, he decided to call Ayers.

One of our System Design Specialist took a trip out to see the damage. After reviewing the problems, our System Design Specialist suggested our French Drain System was required to prevent and protect against rain entering the basement again. 

Our French Drain System consist of an effective perimeter drainage system. This system is installed underneath the flooring near the walls in a basement. Water that enters the home is caught by these pipes and run down to a sump pump. There, the sump pump will carry the water away from the home through a drainage pipe. This allows for a dry basement, all the time. 

We got a call from a customer in Grand Rapids that needed help with a slab of concrete that he has in his backyard by the house. He needed help leveling it out so he asked for our professional help. We drove to his property and installed our PolyLevel technology, which is an advanced polymer injection foam that we blast into the concrete through tiny holes that reinforce the concrete stronger than ever and make it level again. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

This Grand Rapids home had a foundation wall that was cracked and bowing. They were nervous about the home and wanted a solution that would stabilize the wall permanently. We used the GeoLock Wall Anchors which are made of steel and provide a long-lasting solution to prevent further movement in the wall. They won't take up space in the basement and the installation won't disrupt the lawn.

Carrie had an uneven and cracked front porch. The bottom had been washed out when some pipes leak and she wanted it returned to how it originally was. We used PolyLevel which is an injectable foam to lift the concrete back up to where it should be. PolyLevel will hold the porch up because it is waterproof which means it won't wash away. It cures in about 15 minutes so it can withhold weight in a short period of time. To repair the crack we used NexusPro Crack Repair. It is a silicone-based filler that is designed to withstand harsh weather. Like the PolyLevel, its drying time is about an hour which is a fraction of the time of most fillers.