Trustworthy Crawl Space Encapsulation & Concrete Leveling Pros in Fremont, MI

Gary found excess water pooled on his basement floor following the last rainfall. He was unsure where it came from, so he researched his options online and called Ayers to learn about our waterproofing solutions. We sent a team of trained specialists to his house to evaluate and recommend a solution. They installed TripleSafe, the sump pump system designed to eliminate pump failure with three pumps, including a battery-operated pump, in case of power outages. Gary loves how dry his basement is now!

Tim moved into a new house and knew he needed to do something about the nasty crawl space beneath it. After researching his options, he called Ayers to learn about our waterproofing solutions. We sent our crew of specialists to his home to evaluate the situation. They recommended installing CleanSpace, an antimicrobial-lined vapor barrier built to eliminate mold and moisture entry. CleanSpace is applied entirely to the crawl space walls and floors to provide encapsulation. Tim loves the new look of his crawl space!

Kim had no issues with her basement and was hoping to renovate it, No matter what she wanted the main problem was the lack of sunlight. Wanting a trusted contractor specializing in tricky areas like basements, she contacted Ayers.

Our resident foreman Randy was able to inspect the area, listen to Kim's goals, and recommend using one of Ayer's trusted Egress window models.

The new Egress Window was a much-needed improvement from what they had previously. Egress Windows are important to allow natural light into the basement and provide a much cleaner appearance in any basement. Ayers Egress windows are installed with an outdoor base that prevents it from flooding and allows light in while keeping A/C in.

We received a call from one of our customers in Fremont who needed our help with leveling out concrete in his garage. We drove to his property to install PolyLevel whcih is an advanced polymer injection foam that we blast into the concrete through small holes. After injection, the slab of concrte becomes level again and stronger than ever. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

This customer had two stone wall and sand base crawl spaces that the homeowner wanted us to look at. There was no standing water, mold or wood rot at the time, but we wanted to seal of the space before these issues occurred.

We started by installing the CleanSpace plastic liner, which is a waterproof and vapor proof liner that keeps all moisture out of the space. Next, we installed FrothPak insulation to the crawlspace walls to seal and insulate the area. This insulation is made of inorganic materials and doesn’t absorb ambient moisture, which prevents rot and mold growth. Lastly, we installed the SaniDry dehumidification system to wring the damp air dry and circulate dry, filtered air throughout the space.

The basement wall in this Fremont, MI home was cracked and shifting. The homeowner wanted an effective solution that would permanently hold the wall in place and prevent it from worsening over time.

We installed the PowerBrace system to stabilize the wall. We started the installation by reinforcing the joists in the home to take some of the pressure off of the wall when the braces were installed. We installed the steel I-Beams in the floor at the base of the wall and then connected them to the reinforced joists above. Once tightened into place, the system immediately held the wall in place and prevented it from continuing to crack and shift. We provided the homeowners with a tightening kit as well so they can tighten the system over time to potentially pull the wall pack to its proper position.

Shelly had just purchased her new home in Fremont, MI when she discovered some water damage on the basement walls - this wasn't exactly a warm welcome. Luckily, there was no sign of actual standing water in the basement but, she did have a suspicion that mold was present. Not wanting to take any chances with the new house, Shelly gave us a call looking to make sure whatever had damaged the walls didn’t come back to cause more problems. The crew eased her worries with a full waterproofing system.

Installing a perimeter drainage system to collect and lead out any water in the basement was the first step in the process. The WaterGuard perimeter system sits in the floor and wall joint directly below where the water damage had occurred. To pump the water out once it was inside the system, the crew gave Shelly our most reliable sump pump system - the TripleSafe. The two backup pumps (one battery operated) included in the system mean that the sump will never be overpowered by water.  Once the system has pumped out the water, it will be lead to a lawnscape outlet in Shelly’s backyard for final discharge. Lastly, the crew got to work on guaranteeing that mold would never show up in the basement. They installed a SaniDry XP dehumidifier and attached it to the WaterGuard system, so Shelly won't have to worry about draining it herself. It took some time, but Shelly finally has the water-free and protected home she had hoped for when she first moved in. Good luck with the new house!

Glenn M. of Grand Rapids, Michigan had water coming into his basement for years before calling Ayers. The main source of the leak was around his fireplace, and it was ruining the brick and the wall. After having three basement waterproofing companies inspect the problem, Glenn chose Ayers because of our professional presentation and patented products.

The installation crew arrived two weeks after the proposal was signed and got the job done in one day. Forty feet of Waterguard was laid down around the perimeter of the basement walls. Waterguard works by collecting incoming water and funneling it to the sump pump.

Glenn was impressed with the speed and quality of the job. Now he no longer worries about flooding in his basement.

Glenn M. of Grand Rapids, Michigan had water coming into his basement for years before calling Ayers. The main source of the leak was around his fireplace, and it was ruining the brick and the wall. After having three basement waterproofing companies inspect the problem, Glenn chose Ayers because of our professional presentation and patented products.

The installation crew arrived two weeks after the proposal was signed and got the job done in one day. Forty feet of Waterguard was laid down around the perimeter of the basement walls. Waterguard works by collecting incoming water and funneling it to the sump pump.

Glenn was impressed with the speed and quality of the job. Now he no longer worries about flooding in his basement.