Concrete Leveling Before & After Photos

Have you ever driven up the driveway and up to the garage, but in order to get into the garage you have to get over "the bump"? Well at Ayers, we know how to get rid of "the bump" and you'll see the results. One customer in Mendon had to drive over "the bump" to get into the driveway... so she called us. We drove to her property and installed our advanced PolyLevel technology.

Poly Level is a polymer injection foam that we blast into the concrete tiny holes that are smaller than dimes. One of the PolyLevel is injected, the concrete raises to its original position and becomes stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Uneven, sunken driveways and sidewalks can be a major hazard for homeowners. Over time concrete settlement or soil shift can occur which may cause walkways to become uneven and unsteady. Homeowners in East Leroy, MI experienced this problem as they noticed the steps to their front door were noticeably leaning to one side causing a major trip hazard. 

By drilling a small hole into the concrete, PolyLevel foam is injected underneath the surface to stabilize the foundation. The hole is patched back up and the area is ready for weight again after 15 minutes. PolyLevel is strong, waterproof, and noninvasive making it an ideal solution for homeowners dealing with this problem. The before and after pictures show the drastic difference a quick injection can make! 

There were huge cracks and uneven spots around Steve's pool. So he called our team and we installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk by a polyurethane foam. This foam expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

Phillip was in need of a fix for his cracking driveway so he called Ayers so he could get recommendations from professionals. After we conducted an inspection at his home our crew was able to conclude our PolyLevel and NexusPro Crack Repair solutions would do the trick. First PolyLevel is a polymer, lightweight, foam injection that will raise and level the driveway. We add NexusPro Crack Repair since this is a flexible, silicone sealant meant to fill the actual cracks in the concrete. Now Phillip has a much more attractive, smoother driveway again that will be free from tripping hazards!

George P.’s porch was sinking away from his home. The could be settling for various reasons including a change in the soil’s moisture content, soil washed out from under the slab, or poorly compacted soil. The most common solution is concrete replacement or mudjacking. Both these options can be costly and time consuming interrupting your family’s daily life. We used our PolyLevel System. PolyLevel is lightweight, waterproof, has a quick cure time, lifts between 2,000 and 4,000 lbs every square inch, and is environmentally friendly.