Concrete Leveling Before & After Photos

Mike had a water issue in his basement and wanted it fixed. The water was coming in where the wall met the floor so we installed the WaterGuard. The WaterGuard is a French drain system that is installed under the floor but above the foundation so that it won't clog in 'mud zone.' It collects the water that seeps into the basement through the walls and drains it to the sump pump. The WaterGuard installs quickly and is the ideal choice for waterproofing.

Kyle had 2 slabs of concrete in the driveway and then 1 slab in the sidewalk that sank. We used PolyLevel to lift up the fallen concrete and make sure there were no hazards due to the unevenness. PolyLevel is an injected foam that raises the concrete from below and is waterproof so that it won't get washed away.  

One look at the first picture, and the issue is apparent: very uneven and sinking concrete. Not only was this a serious tripping hazard, but the uneven concrete was also causing draining issues outside of this Kentwood home. Our slab repair specialist knew that this uneven concrete was no match for the PolyLevel system. This state of the art approach to fixing uneven concrete works by strategically injecting high-density, waterproof polymers into the slab. After the slab injections, NexusPro joint sealant was added to direct surface water away from the joints of the home, in order to prevent any future problems. Because of PolyLevel’s quick curing time, within 15 minutes of installation, this concrete walkway not only received a quick makeover, but was also ready to be walked (not tripped) on.

This Grand Rapids home has a concrete walkway that connects their driveway to their front porch. They were experiencing some settling concrete in the walkway creating an uneven surface. The owner wanted it fixed so there would not be any trip hazards. We used PolyLevel to lift the concrete slabs and level out the sidewalk. PolyLevel is a lightweight foam that is stable and waterproof so it won't wash out or react with the soil underneath. We then used NexusPro to seal the cracks and keep debris from degrading the slab below. The sealant is designed to withstand harsh weather so it won't dry out or crack. Both NexusPro and PolyLevel dry in a fraction of the time as other solutions so the installation is not an inconvenience to the homeowners. 

We got a call from a customer in Grand Rapids that needed help with a slab of concrete that he has in his backyard by the house. He needed help leveling it out so he asked for our professional help. We drove to his property and installed our PolyLevel technology, which is an advanced polymer injection foam that we blast into the concrete through tiny holes that reinforce the concrete stronger than ever and make it level again. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.