Concrete Leveling Before & After Photos

We recieved a call in March from a customer in Burr Oak about their pool decl that was cracking. We drove to their property and installed PolyLevel which is an advanced polymer injection foam that we blast into the concrete to level it out and make it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. We combined this with our NexusPro Joint Sealer which is a crack free sealer that is perfect for large cracks in the concrete. Now, this homeowner will not have to worry about this ever again.

The floor in this 400 square foot garage was sinking - well, parts of it were, and not all at the same depth. We used PolyLEVEL to restore the concrete slab floor to the proper height, and to make sure that all parts of the slab were at the SAME height.

A customer needed help leveling his concrete patio and sidewalk so he called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

Grayson had a cracked and settling concrete porch that he wanted to have fixed before he built a deck over it. He wanted to make sure it did not hold water under the deck so it was important to have it lifted. We used PolyLevel to raise the concrete back up to the original level and NexusPro to seal the cracks. PolyLevel is a waterproof and stable foam where NexusPro is a sealant made to withstand harsh weather. Both dry in a fraction of the time compared to other solutions so the process is not an inconvenience. 

Gene noticed that the walkway to his home had begun to drop to the ground. He contacted us at Ayers Basement Systems to find a solution. After an inspection, the team suggested the PolyLevel system! This process inserts expandable foam below the surface of the concrete, allowing the crew to level the surface without a mess! Gene was thrilled that his walkway looked great and was supported!